EHID Radioproblems

Post Reply
saabpilot
Posts: 906
Joined: 08 Jan 2011, 16:03
Contact:

EHID Radioproblems

Post by saabpilot » 17 Feb 2019, 21:06

Hi,

I am now on ProSim 2.03 and P3D v 4.4
All my 5 radios from Cockpitsonic freezes so I cannot set frequencies or make any Xfer between SBY and Active Freq (All worked fine in ProSim v 1.47)
In ProSim I can read that EHID is connected.

Also but lesser importance - do not know how to change display or backlight intensity.

EHID_XML_B737_1150.msi is executed and licenced.

Any ideas appreciated,

Best,
Bjorn
I7 7700K@4.5, Nvidia 1070, 4x Esprimo I5 mini PC, Optoma HD proj, P3D v4.3, ORBX, RAAS Pro, ProATC-X, Buttkicker, CPF Pro MCP/EFIS, RSP motor TQ, OC v3 CDU, FDS Elite CDU
website = http://www.boeing737sim.se

saabpilot
Posts: 906
Joined: 08 Jan 2011, 16:03
Contact:

SOLVED - EHID Radioproblems

Post by saabpilot » 26 Feb 2019, 20:30

The EHID files were corrupted, so after deleted all EHID files, reinstalling and transfer the ini file back everything works OK via ProSim 2.

However there is no slider for the digits intensity in ProSim, only a slider that sets the backlight. A slider would be nice since the digits via ProSim and EHID are a bit dark now.
Provision for the digits intensity can be found as sliders in the older beta driver from Cockpitsonic which runs as an app.
When set they are supposed to be downloaded into the radio modules internal memory by a button in this driver.
I7 7700K@4.5, Nvidia 1070, 4x Esprimo I5 mini PC, Optoma HD proj, P3D v4.3, ORBX, RAAS Pro, ProATC-X, Buttkicker, CPF Pro MCP/EFIS, RSP motor TQ, OC v3 CDU, FDS Elite CDU
website = http://www.boeing737sim.se

Post Reply

Return to “Cockpitsonic”