Search found 317 matches

by Aussie1234
08 Aug 2020, 22:43
Forum: ProSimB738 - Technical support - software related
Topic: Upgrade to ProSim 3.00
Replies: 110
Views: 4367

Re: Upgrade to ProSim 3.00

As you said, test flights are becoming more enjoyable and you can complete long flights without the FMC becoming confused. :) A number of things to be fixed but each beta certainly helps. One thing not to do during a flight, is try and enter the arrival RW wind direction and strength on the appropri...
by Aussie1234
06 Aug 2020, 22:06
Forum: ProSimB738 - Pre-releases
Topic: Beta 14 airport landing reference amber band always shows lower than airport elevation
Replies: 7
Views: 239

Re: Beta 14 airport landing reference amber band always shows lower than airport elevation

I just realised I wrote that response in Driver's thread about the amber being lower. :roll: I was referring to a different issue: when arriving, the Amber being still at the same height as the departure airfield i.e. Departing YSCB at 1850ft, then arrive YSSY @ 50 ft. having passed through the ambe...
by Aussie1234
06 Aug 2020, 01:25
Forum: ProSimB738 - Technical support - software related
Topic: Upgrade to ProSim 3.00
Replies: 110
Views: 4367

Re: Upgrade to ProSim 3.00

I have had experienced it in P3D v4.5HF3. But for me never in daylight. I have had it in dusk conditions but have not flown at night.
So for me, I haven't seen it since my early tests.
I have HDR 'ON'
by Aussie1234
05 Aug 2020, 22:35
Forum: ProSimB738 - Pre-releases
Topic: v3.00b20 and before - Opencockpits EFIS problem
Replies: 5
Views: 165

Re: v3.00b20 and before - Opencockpits EFIS problem

I am still on V3.00 beta18 (yet to fire up the cockpit in shed this morning. -4'C outside.) so I don't know if b20 addressed the ongoing Opencockpit's EFIS push buttons not working. I see a few of us as having the problem. All the Opencockpits hardware works well in Version 2.30 with Gert and Lapi's...
by Aussie1234
02 Aug 2020, 23:22
Forum: ProSimB738 - Technical support - software related
Topic: Config.xml problem
Replies: 10
Views: 397

Re: Config.xml problem

There are three things with the current V3 beta: First: Regarding the new AIRCRAFT, you did the correct thing. Deleting the 2019 model first, and changing the destination to Version 4.5 if that is all you have (like me). Second: Make sure you install the new MODULE. Prosim should help you to do it w...
by Aussie1234
01 Aug 2020, 23:07
Forum: ProSimB738 - General discussion
Topic: Tip for GSX2 users when moving to new B737 aircraft.
Replies: 10
Views: 519

Re: Tip for GSX2 users when moving to new B737 aircraft.

Different problem. Simon reported yesterday he is working on that issue in a different thread.

What I pointing out with this thread, (as Pete noted) that the Prosim supplied GSX file needs to go into a folder with the identical name. GSX can create it for you or, you can do it yourself.
Aussie
by Aussie1234
31 Jul 2020, 09:21
Forum: ProSimB738 - Pre-releases
Topic: V3.00b17 No Headings FMC legs Page
Replies: 6
Views: 128

Re: V3.00b17 No Headings FMC legs Page

Are we talking about the same issue I reported yesterday?

https://www.prosim-ar.com/forum/viewtop ... 81&t=20397

I still have it on b17

Aussie
by Aussie1234
31 Jul 2020, 09:18
Forum: ProSimB738 - Pre-releases
Topic: V3.00b17 Unable to engage CMD A
Replies: 4
Views: 106

Re: V3.00b17 Unable to engage CMD A

Hi Bernie,

Engaging CMD A is OK for me since b09. (as long as I have the yoke in a neutral position) (Are you sure you don't need to go into Prosim and reset the neutral position?) Are you getting the [CWS] warning?

Engaging CMD A & B is also OK for me on and ILS approach.

Aussie
by Aussie1234
31 Jul 2020, 09:04
Forum: ProSimB738 - Pre-releases
Topic: ProSim v3 - No ILS and VOR indication
Replies: 25
Views: 882

Re: ProSim v3 - No ILS and VOR indication

I have a vague recollection, over on the GSX Forum, That GSX wasn't finding some people's parking information it wanted, because it was located in certain bgls that were too big and it was assuming it was just scenery and not AFCAD related? Seems a person need to enlarge the accepted size of files, ...

Go to advanced search